The “Flanging Tool” (MicroSolv cat# 45099-001) or Kit (cat# 45099-002) is designed for use with relatively soft tubing that is used with low pressure. It can be used for FEP, ETFE, PFA, or PTFE tubing. Since the flange is made by mechanical means and not by heat the flange is more long lasting and durable, however, the tool […]
Category: Equipment FAQ
Sub Categories:
Can the MicroSolv Super-T PEEK tubing items be used in medical applications?
In general, PEEK is FDA-approved as a long term implantent and can be sterilized. This refers only to the natural type of PEEK tubing and does not include tubing with stripes or markings. The dashed stripes from the Super-T tube can be removed with acetone if desired. However, these tubing items are designed for instrument use and using […]
How do I stack multiple ColumnStore units?
The ColumnStore™ column storage boxes are designed and shipped with labels placed on each unit which read “Box 1 of 3″/ “Box 2 of 3″/ “Box 3 of 3” for example. This will indicate the order that the boxes should be stacked. Follow the instructions in the below to stack the boxes. You use a […]
How resistant are the ultra-fine point markers to smearing?
The markers were tested on standard glass autosampler vials and the writing was found to be completely smear-resistant when using a dry cloth, after waiting a short while for the ink to dry. If you wish to remove the writing however, this can be accomplished with a solvent such as methanol, acetone, or isopropanol.
What diameters are available for your ultra-fine point markers?
Three different sizes are available: 0.25, 0.35, and 0.45 mm point diameter. The smaller diameter point will allow for finer, more detailed markings. These can be useful for situations where space to write is limited such as on a glass insert.
What is the difference between the ColumnStore 120 and four ColumnStore 30s? Are four units stable?
The ColumnStore 120™ is essentially four ColumnStore 30™s plus three brackets, so they are no different except in the way they are packaged for shipping. A four unit high stack will not be quite as stable as a two or three unit assembly, but it won’t fall over because the brackets are designed so it can’t (unless something leans against […]
What Type of Injector Should I use with the 2 µL Sample Loop?
The 2 µL Sample Loop (catalog # 47001-002) can be used with Rheodyne™ 9725 and 9725i Sample Injectors which are suitable for a 2 µL Injection Volume. In addition, it is Designed for use with a Rheodyne type Injector and Not Valco types. Sample Loop Product Page
Which rack should I use for 20mL vials?
The MicroSolv catalog number you will need for 20mL vials is 95040-SB1: “Storage Box/Rack w.cover, PP, for 20ml EPA/VOA vials, violet, 130mm x 130mm x 102mm. 16 cavities.” There is also a rack suitable for autosampler vials. The part number here is 95025-SB: “Storage Box/Rack w.cover, PP, for headspace vials, blue plastic, 130mm x 130mm x […]