Under normal conditions, yes you use the Filter Degasser to remove CO2. In terms of the performance of this unit, the intended scope of the product is for removal of particulate matter and gas bubbles that can appear in HPLC solvents. The filter membrane that is included for particulates is compatible with most HPLC solvents and the […]
Category: Filtration FAQ
Sub Categories:
Chrom Syringes FAQ
Cogent Column Filters - FAQ
Filter Degasser FAQ
Sparging Stones FAQ
Syringe Filters FAQ
Has There Been a Risk Assessment for the Use of SOLVFil in GMP Laboratories? – FAQ
Using SOLVFil™ is Faster and Better than Traditional Membrane Filtration While we have never produced a formal Risk Assessment, we have given much consideration of Risks to data integrity during the design phase and production stages. We have been using SOLVFil™ Filters in our own laboratory for quite some time and have not seen any […]
Should I filter my HPLC Solvents and Buffers before use? – FAQ
The most common cause of excessive back pressure is due to the accumulation of particulates and or permanently adsorbed materials at the top of the HPLC Column. This could be precipitate or un-dissolved particles which can come from your samples or your mobile phase or shredded pieces of pump seals. The best way to minimize […]