Some extruders of PFA tubing list the specifications below on their website.

Physical
Density (g/cc): 2.12 – 2.17
Water Absorption (%) < 0.03 Standard Percent Crystallinity (%): 48 – 70 Refraction Index: 1.350 Radiation Resistance (MRad): 1 – 10 Oxygen Index (%): > 95

Mechanical
Hardness, Shore D: 55 – 60
Ultimate Tensile Strength (MPa): 25 – 28
Elongation at Break (%): 250 – 420
Modulus of Elasticity (GPa): 0.48
Flexural Modulus (GPa): 0.50 – 0.70
Coefficient of Friction: 0.04 – 0.20

Electric
Volume Resistivity (Ω–cm): 1.0 × 1018
Dielectric Constant: 1 MHz 1.9 – 2.1
Dielectric Strength (V/mil): 2030

Thermal
Thermal Conductivity (W/m–K): 0.15 – 0.25
Maximum Service Temp, Air (°C): 260
Minimum Service Temp, Air (°C): -200
Melt Temp (°C): 300 – 315
Glass Temp (°C): 90
Decomposition Temp (°C): 475
Coefficient of Thermal Expansion, linear 20° (μm/m–°C): 120 – 140

Click HERE for Low Pressure, HPLC Tubing Ordering Information