Article Categories
ARTICLES, APPNOTES, FAQ
What is the maximum pressure of the 2.1mm PEEK HPLC columns - FAQ
November 12, 2013
/
/
/
/
/
The maximum recommended pressure of the PEEK HPLC column under routine use is 165 bar (2400 psi).
The MICROSOLV 2.1mm ID PEEK column is made of 1/8” tubing. However, when packing the stationary phase, a pressure of up to ~250 bar (3600 psi) can be applied for a short time.
The MICROSOLV 2.1mm ID PEEK column is made of 1/8” tubing. However, when packing the stationary phase, a pressure of up to ~250 bar (3600 psi) can be applied for a short time.