What is the maximum pressure of the 2.1mm PEEK HPLC columns - FAQ
November 12, 2013
/
/
/
/
/
The maximum recommended pressure of the PEEK HPLC column under routine use is 165 bar (2400 psi).

The MicroSolv 2.1mm ID PEEK column is made of 1/8” tubing. However, when packing the stationary phase, a pressure of up to ~250 bar (3600 psi) can be applied for a short time.

Related Articles

  1. Guidelines for packing in the PEEK column hardware - Tips & Suggestions
  2. What is the maximum pressure Cogent HPLC columns can tolerate - FAQ
  3. What is the pressure capability of the ARE brand all PEEK column coupler - FAQ

© Copyright 2025. MICROSOLV. All Rights Reserved. Website & Hosting by BlueTone Media