What is the best way to attach the inlet of the knitted reactor coil KRC tubing to the outlet of a tee with a PEEK finger tight fitting that will hold high back pressure - FAQ
October 27, 2016
/
/
/
Confirm that there is not an impediment to reasonable flow through the tubing which could increase the back pressure. We would then recommend using our items 47320-30 and 47320-34 which are high pressure PEEK HPLC tubing connectors or male nuts and ferrules. 

Related Articles

  1. Is a knitted reactor coil KRC included in the purchase of the photochemical reactor for HPLC - INTERNAL ONLY
  2. What are the knitted reactor coils KRC manufactured with - FAQ
  3. What is the pressure rating of the knitted reactor coils KRC - FAQ

© Copyright 2025. MICROSOLV. All Rights Reserved. Website & Hosting by BlueTone Media