What is the correct thread type and tubing to use with the filter sparging stones - FAQ
July 2, 2013
/
/
/
/
/
/
/
Our filter / sparging stones have an internal thread of 5-40.  These should be used with low pressure 1/8” or 1/16" ID polymeric tubing. The threads are actually small barbs that grab onto the tubing, ensuring a secure fit.

NOTE: It may be important to use the internal threaded sparging stones instead of those with fittings to avoid the mixture of many different components in the solvent. This type of connection of the tubing and the stone should not come off in situ as can happen with the tubing/stem configuration.

Click HERE for filter sparging stone ordering information and pictures
Click HERE for low pressure tubing ordering information and pictures

Related Articles

  1. How to handle sparging stones to avoid contamination of mobile phases - Tips & Suggestions
  2. What is the pressure limit of the stainless steel filter sparging stones - FAQ
  3. Your filter sparging stones with stems are listed as 1/8 or 1/16 ID shouldn't this be OD - FAQ

© Copyright 2025. MICROSOLV. All Rights Reserved. Website & Hosting by BlueTone Media