The Tubing Cutter is specified for stainless steel / PEEK tubing as well as copper material. It is also designed to cut tubing without damaging the inner diameter when used properly.
Category: Tools
Can I use the Tubing Pliers (item # 46050-01) with 1/16″ or 1/8″ OD SS tubing?
This tool is compatible with both 1/16” and 1/8″ OD tubing. The tool can be used to score and then break the SS tubing. Below is a picture of the tool for reference. Tubing Tools Ordering Information
Can the stainless steel tubing cutter accommodate different size tubing?
Yes, the stainless steel tubing cutter (cat# 46001-01) has a screw which is tightened to secure the tubing and can be adjusted for a range of different tubing diameters. It can be used for any tubing diameter in the range of 1/32″ to 1/4”. Ordering Information
How do you replace the blade on the PEEK tubing cutter tool?
There is a stainless steel pin that holds the blade in place. This had to be pushed out carefully. It will take some force as it is pressed in and will not fall out easily. Once this component is out, the old blade can be removed and the new one added in its place. Then […]
How to Cut PEEK Tubing, Use a Clean Cut90 Cutter.
It is Extremely Important to have a Proper Cut for all HPLC Tubing Including PEEK Tubing. The Cutting Blade of the Clean-Cut90™ PEEK Tubing Cutter (shown below) has 2 sides. One side will be marked on the tool with an Arrow, and this produces the Perpendicular Cut (90° angle) that you want to use. Be […]
How to Remove a Ferrule that is Stuck in an HPLC System or Column- Tips & Suggestions
Sometimes a Ferrule will become jammed inside a Column or elsewhere in the HPLC System. When this happens, don’t worry! The Ferrule can be Removed using our Specially Designed Ferrule Removal Tool. The Tool works due to the direction of the threads, which go the opposite way from that of a standard Drill Bit. This […]
What is the difference in the Beta Tool and other similar pliers on the market?
The Beta Tool™ is a pair of precision pliers not unlike many others. But what makes this very different from others who try to mimic it is the center hole. This precision drilled hole is very difficult to create each and every time as it has to be “dead center” for it to work properly. Other manufacturers offer similar precision pliers […]