Programming The Optional VX-EXP Expansion Module

Programming The Optional VX-EXP Expansion Module

Speed Dials
A) Hold down the button you want to program until the screen on the phone changes.
B) Using the directionals, change “Type” to “Speed Dial.”
C) Scroll down to “Label” and enter the desired label.
D) Scroll down to “Value” and enter the number to be dialed.
E) Press “Save.”

Busy Lamp Fields (Status Monitors)
A) Hold down the button you want to program until the screen on the phone changes.
B) Using the directionals, change “Type” to “BLF.”
C) Scroll down to “Label” and enter the desired label.
D) Scroll down to “Value” and enter the extension number you want to monitor.
E) Press “Save.”

NOTE: A green light indicates an idle phone, a blinking red a ringing phone, and a solid red indicates that the phone is in use.

Additional Line Key
A) Hold down the button you want to program until the screen on the phone changes.
B) Using the directionals, change “Type” to “Line.”
C) Press “Save.”
NOTE: Setting the top left key “Type” to “Switch” allows you to change between two sets of programmable keys, for a total of 38 different appearances.