Ask a Question Browse Login
Tools
Categories

Autoclaving Glass Inserts with plastic feet is not recommended.

Reference Number: AA-03905 Created: 04/14/2020 12:56 PM Last Updated: 09/18/2020 04:37 PM

Autoclaving glass or plastic inserts with attached plastic springs is not recommended. While the glass can withstand temperatures up to 1,000°F, the polyetheylene spring will become deformed, may crack and will lose its functionality.

You can sterilize these inserts through ethylene oxide gas sterilization.
       



   © Copyright MicroSolv Technology Corporation, all rights reserved.

Info Ask a Question 
Your Email: Subject: Question: