MicroSolv Technologies Knowledge Base

Microsolv

Browse Ask a Question
 
Tools
Categories

What pressure should I expect with a Diamond Hydride 2.o™ HPLC column at flow rates from 0.2-2.0 mL/min?

Reference Number: AA-02711 Created: 10/14/2015 09:22 AM Last Updated: 07/25/2016 01:53 PM
The below data was recorded on a Waters UPLC™ system. Please note that the pressure can vary widely depending on such factors as mobile phase viscosity, temperature, column ID, and column length. The conditions shown below should clarify any questions you may have regarding this data.

    

Column: Cogent Diamond Hydride™, 2.2um 120A, 2.1 x 50mm, cat# 70200-05P-2
Flow Rate: 0.2-2.0 mL/min
Temperature: 25 °C, thermostatted
Mobile Phase: 80% Acetonitrile/ 20% DI water/ 0.1% formic acid, premixed (v/v)

     Cogent Diamond Hydride Product Page

   
     © Copyright MicroSolv Technology Corporation, all rights reserved.

Info Ask a Question 
Your Email: Subject: Question: