Ask a Question Browse Login
Tools
Categories

 Featured
Why are the same autosampler vials listed as 2mL, 1.8mL, 1.5mL, etc. by different suppliers?

Reference Number: AA-01800 Created: 09/13/2013 02:42 PM Last Updated: 09/15/2020 02:11 PM

There are a number of ways to consider the volume of a vial. 

One way is if you fill the vial all the way up until there is no headspace when the cap is secured. You could call this a 2mL vial. In practice though, a sample cannot contain this much volume because of displacement caused by the syringe needle during injection.

For this reason, a 1.8mL of 1.5 "useable volume" designation is sometimes stated instead. This is known as a "nominal" volume or simply a name.

Why is this important? . If you fill the vial to the brim, it will contain approximately 2ml. If you put a needle in it to remove some of the liquid for injection, the needle will displace the liquid and it will spill over the top. If a cap is on the vial, liquid will squirt out of the hole the needle makes. So the volume for autosampler filling is called a nominal volume.

Click HERE for Autosampler Vials, Caps, Inserts & Accessory Ordering Information


     ©Copyright MicroSolv Technology Corporation, all rights reserved.

 

Info Ask a Question 
Your Email: Subject: Question: