MicroSolv Technologies Knowledge Base

Microsolv

Browse Ask a Question
 
Tools
Categories

How can I separate phenylephrine HCl, acetaminophen, and dextromethorphan?

Reference Number: AA-01179 Created: 01/11/2013 02:06 PM Last Updated: 07/23/2016 03:26 PM

The Cogent Phenyl Hydride™ would be recommended for these compounds because of the dextromethorphan. It has a strong tendency to tail on most columns but the Phenyl Hydride™ column and can produce a very symmetrical peak; a mobile phase additive of 0.1% TFA would be beneficial as well for reducing dextromethorphan tailing.

Phenylephrine HCl does not normally retain very well in reversed phase so a starting mobile phase of ~95% aqueous is suggested. The dextromethorphan is more hydrophobic and so a gradient going to ~50% organic would be recommended. Be sure not to start the gradient until after the phenylephrine elutes or you may get less retention. Acetaminophen shows moderate retention and good separation should be achievable between it and phenylephrine with a high water mobile phase.

The Cogent Bidenate C18™ column is another alternative. It is more hydrophobic than the Cogent Phenyl Hydride™ so you may get better retention of the phenylephrine and acetaminophen. However, dextromethorphan will likely have more tailing than with the Cogent Phenyl Hydride™.  

     Phenyl Hydride™ Product Page
     Bidentate C18™ Product Page 

   
      © Copyright MicroSolv Technology Corporation, all rights reserved.

Info Ask a Question 
Your Email: Subject: Question: