MicroSolv Technologies Knowledge Base

Microsolv

Browse Ask a Question
 
Tools
Categories

Autoclaving inserts with plastic feet is not recommended.

Reference Number: AA-00869 Created: 05/24/2012 10:13 PM Last Updated: 03/28/2017 05:02 PM

Autoclaving glass or plastic inserts with attached plastic springs is not recommended. While the glass can withstand temperatures up to 1,000°F, the polyetheylene spring will become deformed, may crack and will lose its functionality.

You can sterilize these inserts through ethylene oxide gas sterilization.

   Inserts Product Page




   © Copyright MicroSolv Technology Corporation, all rights reserved.

Info Ask a Question 
Your Email: Subject: Question: