MicroSolv Technologies Knowledge Base

Microsolv

Browse Ask a Question
 
Tools
Categories

What is Aqueous Normal Phase (ANP) and how can it help you?

Reference Number: AA-02813 Created: 06/20/2016 02:06 PM Last Updated: 09/23/2017 11:12 AM

Aqueous normal phase chromatography
    
From Wikipedia, the free encyclopedia

Aqueous normal phase chromatography (ANP) is an HPLC technique which encompasses the mobile phase region between reversed-phase chromatography (RP) and organic normal phase chromatography (ONP) and is used mainly for polar compounds.

In normal phase chromatography, the stationary phase is polar and the mobile phase is nonpolar. In reversed phase we have just the opposite; the stationary phase is nonpolar and the mobile phase is polar. Typical stationary phases for normal phase chromatography are silica or organic moieties with cyano and amino functional groups. For reversed phase, alkyl hydrocarbons are the preferred stationary phase; octadecyl (C18) is the most common stationary phase, but octyl (C8) and butyl (C4) are also used in some applications. The designations for the reversed phase materials refer to the length of the hydrocarbon chain.

In normal phase chromatography, the most nonpolar compounds elute first and the most polar compounds elute last. The mobile phase consists of a very nonpolar solvent like hexane or Heptane mixed with a slightly more polar solvent like isopropanol, ethyl acetate or chloroform. Retention increases as the amount of nonpolar solvent in the mobile phase increases. In reversed phase chromatography, the most polar compounds elute first with the most nonpolar compounds eluting last. The mobile phase is generally a binary mixture of water and a miscible polar organic solvent like methanol, acetonitrile or THF. Retention increases as the amount of the polar solvent (water) in the mobile phase increases. Normal phase chromatography, an adsorptive mechanism, is used for the analysis of solutes readily soluble in organic solvents, based on their polar differences such as amines, acids, metal complexes, etc. Reversed phase chromatography, a partition mechanism, is typically used for separations by non-polar differences.

The "hydride surfaces" distinguish the support material from other silica materials; most silica materials used for chromatography have a surface composed primarily of silanols (-Si-OH). In a "hydride surface" the terminal groups are primarily -Si-H. The hydride surface can also be functionalized with carboxylic acids and long-chain alkyl groups. Mobile phases for ANPC are based on an organic solvent (such as methanol or acetonitrile) with a small amount of water; thus, the mobile phase is both "aqueous" (water is present) and "normal" (less polar than the stationary phase). Thus, polar solutes (such as acids and amines) are most strongly retained, with retention decreasing as the amount of water in the mobile phase increases.

The mechanism by which ANP operates is believed to be due primarily to adsorption of analytes directly onto the surface, as investigations incorporating zeta potential measurements have demonstrated. In contrast, HILIC retention has been shown to be largely due to partitioning of the analyte in a thick water layer that naturally forms on the surface of silica based stationary phase materials, due to their hydrophilic character. Because the Si-H group is not polar like the Si-OH moieties that predominate on traditional silica based phases, a water layer does not form with silica hydride columns. This difference in retention mechanism can have notable advantages in terms of the robustness of a chromatographic separation, since the variable nature of the water shell can lead to differences in retention from run to run.

Typically the amount of the nonpolar component in the mobile phase must be 60% or greater with the exact point of increased retention depending on the solute and the organic component of the mobile phase. A true ANP stationary phase will be able to function in both the reversed phase and normal phase modes with only the amount of water in the eluent varying. Thus a continuum of solvents can be used from 100% aqueous to pure organic.
ANP retention has been demonstrated for a variety of polar compounds on the hydride based stationary phases in the article “Hydride-based stationary phases: A rapidly evolving technology for the development of new bio-analytical method”, J.J. Pesek, R.I. Boysen, M.T.W. Hearn, M.T. Matyska, Anal. Methods, 6 (2014) 4496-4503.

An interesting feature of these phases is that both polar and nonpolar compounds can be retained over some range of mobile phase composition (organic/aqueous) as a result of residual silanol groups acting in a HILIC mode. This property distinguishes it from a pure HILIC (hydrophilic interaction chromatography) column where separation by polar differences is obtained, or a pure RP stationary phase on which separation by nonpolar differences in solutes is obtained with very limited secondary mechanisms operating.

Another important feature of the hydride-based phases is that for many analyses it is usually not necessary to use a high pH mobile phase to analyze polar compounds such as bases. The aqueous component of the mobile phase usually contains from 0.1 to 0.5% formic or acetic acid, which is compatible with detector techniques that include mass spectral analysis.

Aqueous Normal Phase HPLC will only perform properly on Cogent TYPE-C™ Silica HPLC columns manufactured by MicroSolv Technology Corporation. 

   
     © Copyright MicroSolv Technology Corporation, all rights reserved.

Info Ask a Question 
Your Email: Subject: Question: